CTS-V V8-6.0L VIN U (2006)
Shift Solenoid: Service and Repair
Reverse Lockout Solenoid Replacement
Reverse Lockout Solenoid Replacement
Tools Required
^
J41099 Skip Shift Sensor Remover/Installer
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the exhaust system.
3. Support the transmission with a suitable jack.
4. Remove the transmission support.
5. Remove the transmission mount.
6. Disconnect the reverse lockout solenoid electrical connector (5).
7. Using the J41099, remove the reverse lockout solenoid.
8. Remove the bolt and the reverse lockout assembly, if necessary.
Installation Procedure