CTS-V V8-6.0L VIN U (2006)
Air Bag(s) Arming and Disarming: Service and Repair
Disabling & Enabling the SIR System
Disabling the SIR System
1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead
2. Turn the ignition switch to the OFF position.
3. Remove the key from the ignition switch.
IMPORTANT: With the SIR fuse removed and the ignition switch in the ON position, the AIR BAG warning indicator illuminates. This is
normal operation, and does not indicate an SIR system malfunction.
4. Remove the rear seat.
5. Locate rear fuse center (1) under rear seat, remove rear fuse center cover from right (passenger) side of vehicle.
6. Locate and remove SIR fuse from the right rear fuse center (1).
7. Remove the right rear sail panel.
8. Remove the Connector Position Assurance (CPA) (1) from the right/passenger roof rail module yellow connector (2).
9. Disconnect the right roof rail module yellow connector (3) from the vehicle harness yellow connector (2).
10. Remove the passenger sound insulator from the instrument panel (IP) (3).
11. Remove the Connector Position Assurance (CPA) from the IP/passenger yellow connector (1).
