CTS-V V8-6.0L VIN U (2006)
Seat Belt Retractor: Service and Repair
Center Rear
SEAT BELT RETRACTOR REPLACEMENT - CENTER REAR
REMOVAL PROCEDURE
1. Remove the rear seat cushion.
CAUTION: Refer to SIR Caution in Service Precautions.
2. Remove the rear seat back.
3. Disengage the center belt escutcheon from the rear shelf trim panel.
4. Remove the rear shelf trim panel.
5. Remove the rear seat center belt retractor fastener (1).
6. Remove the rear seat center belt retractor (2).
INSTALLATION PROCEDURE
1. Install the center seat belt retractor (2) to the cross car beam. Ensure the retainer tab engages the notch in the cross car beam.
2. Install the center seat belt retractor fastener (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the rear seat center shoulder belt retractor fastener to 30 N.m (22 lb ft).
3. Install the rear shelf trim panel.
