CTS-V V8-6.0L VIN U (2006)
Hazard Warning Switch: Service and Repair
HAZARD WARNING SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the center I/P vent.
2. Disconnect the hazard switch electrical connector.
3. Release the tabs (1) securing the switch to the vent.
4. Remove the hazard switch.
INSTALLATION PROCEDURE
1. Install the hazard switch to the vent ensuring the locking tabs (1) on the switch are secure.
2. Connect the hazard switch connector.
3. Install the center I/P vent to the I/P.
