CTS-V V8-6.0L VIN U (2006)
10. Install the parking brake cable bracket to the knuckle.
11. Install the parking brake cable bracket mounting bolts to the knuckle.
^
Tighten the upper ball joint nut to 20 N.m (15 lb ft) plus a additional 210 degree turn.
^
Tighten the lower control arm to knuckle bolt to 175 N.m (129 lb ft).
^
Tighten the lower shock mounting bolt to 150 N.m (111 lb ft).
^
Tighten the trailing arm to knuckle bolt and nut to 175 N.m (129 lb ft).
^
Tighten the adjustment link to knuckle bolt to 175 N.m (129 lb ft).
^
Tighten the parking brake cable bracket bolts to 60 N.m (44 lb ft).
12. Remove the jack.
13. Connect the ABS sensor electrical connector to the backing plate.
14. Connect the ABS sensor electrical connector.
15. Install a new wheel drive shaft nut.
Tighten the nut to 160 N.m (118 lb ft).
16. Install the brake rotor.
17. Install the tire and wheel.
18. Lower the vehicle.
