CTS-V V8-6.0L VIN U (2006)
4. Install the upper control arm to steering knuckle.
5. Install the upper control arm to steering knuckle pinch bolt and nut.
^
Tighten the nut to 60 Nm (44 ft. lbs.).
6. Connect the stabilizer shaft link to the lower control arm.
Important: Apply threadlocker 242 or equivalent to the threads of the stabilizer shaft link.
7. Install the stabilizer shaft link retaining nut.
^
Tighten the nut to 50 Nm (37 ft. lbs.).
8. Connect the outer tie rod to the steering knuckle.
9. Install the outer tie rod retaining nut.
^
Tighten the nut to 75 Nm (55 ft. lbs.).
10. Install the wheel bearing/hub.
11. Install the tire and wheel.
12. Lower the vehicle.
