CTS-V V8-6.0L VIN U (2006)
9. Remove the shock module upper mounting bolts.
10. Remove the shock module from the vehicle.
Installation Procedure
1. Install the shock module to the vehicle.
2. Install the shock module upper mounting bolts.
^
Tighten the bolts to 112 Nm (83 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
3. Position the air conditioning line bracket to the stud.
4. Install the air conditioning line retaining nut to stud.
^
Tighten the nut to 9 Nm (80 inch lbs.).
5. Raise the vehicle.
6. Install the shock module lower mounting bolts (1).
