CTS-V V8-6.0L VIN U (2006)
9. Install J 45859 or equivalent, to the wheel bearing/hub.
10. Using J 45859 or equivalent, disengage the wheel drive shaft from the wheel bearing/hub.
11. Remove the wheel bearing/hub mounting bolts.
12. Remove the wheel bearing/hub and backing plate from the knuckle.
Important: The wheel hub remover may be needed in order to fully disengage the wheel bearing/hub from the drive axle.
13. Remove J 45859 or equivalent, from the wheel bearing/hub.
Installation Procedure
1. Install the wheel bearing/hub and backing plate to the knuckle.
2. Install the wheel bearing/hub mounting bolts.
Tighten the bolts to 125 Nm (92 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.