CTS-V V8-6.0L VIN U (2006)
Shift Interlock Solenoid: Service and Repair
Automatic Transmission Shift Lock Actuator Replacement
Removal Procedure
1. Remove the shift control boot.
2. Remove the center console assembly.
3. Disconnect the wiring harness connector (1) from the shift lock control pigtail connector (2).
4. Slide the pigtail connector (2) off of the retainer (3).
5. Remove the pigtail harness from the wire retainer (4).
6. Remove the three shift lock actuator attaching screws (1).
7. Remove the shift lock actuator (2) from the shift control assembly.
Installation Procedure
1. Install the shift lock actuator (2) to the shift control assembly.
2. Install the three shift lock actuator attaching screws (1).