CTS-V V8-6.0L VIN U (2006)
8. Remove the mechanics wire (2) securing front propeller shaft (1) to the shift control lever (3).
9. Install the propeller shaft coupler (1) to the transmission flange.
10. Install the exhaust system.
11. Place the transmission in the park position by rotating the shift shaft fully counter clockwise.
12. Connect the shift linkage to the transmission.
13. Notice: Refer to Fastener Notice in Service Precautions.
Install the transmission manual shift shaft nut.
Tighten the transmission manual shift shaft nut to 15 Nm (11 ft. lbs.).
14. Fill the transmission to the proper level. Refer to Transmission General Specifications, Fluid Capacity Specifications, and Transmission Fluid
Checking Procedure.
15. Lower the vehicle.
