CTS-V V8-6.0L VIN U (2006)
Shift Linkage: Service and Repair
Floor Shift Control Replacement
Floor Shift Control Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the adjustment nut from the shift control linkage.
3. Disconnect the shift control linkage rod from the shift control assembly.
4. Lower the vehicle.
5. Remove the shift control trim plate by lifting the rear of the trim plate up. Pull the plate rearward in order to disengage the front retaining tabs.
6. Remove the center console assembly.