CTS-V V8-6.0L VIN U (2006)
Shift Boot: Service and Repair
Aisin AY6 - Manual Transmission
Control Lever and/or Boot Replacement
Removal Procedure
1. Lift up on the rear portion of the shift control closeout boot retaining ring and detach the ring from console.
2. Important: Detaching the shift control knob from the shift lever may require a large amount of physical effort.
Firmly grasp the shift control knob and pull straight up in order to detach the shift control knob from the shift lever.
3. Remove the shift control closeout boot and knob.
Installation Procedure
1. Install the shift control closeout boot and knob to the shift lever.
2. Firmly press down on the shift control knob in order to attach the shift control knob to the shift lever.
