CTS V6-2.8L (2006)
Navigation System: Service and Repair
Global Positioning System (GPS) Antenna Replacement
GLOBAL POSITIONING SYSTEM (GPS) ANTENNA REPLACEMENT
REMOVAL PROCEDURE
1. Remove the I/P retainer.
2. Remove the screws (1) securing the global position antenna to the I/P carrier.
3. Remove the wiring from the carrier.
IMPORTANT: Do not splice the wiring or make the antenna lead shorter.
INSTALLATION PROCEDURE
1. Route the antenna wire to the carrier.
2. Install the antenna to the carrier.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws (1) to 2 N.m (18 lb in).
3. Install the I/P retainer.