CTS V6-2.8L (2006)
Ultrasonic Sensor: Service and Repair
THEFT DETERRENT INTRUSION SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the rear dome lamp lens (1).
2. Remove the dome lamp assembly.
3. Remove the intrusion sensor from the dome lamp trim cover.
4. Release the tabs securing the intrusion sensor to the dome lamp assembly.
INSTALLATION PROCEDURE
1. Install the intrusion sensor in the dome lamp assembly.
IMPORTANT: The intrusion sensor must be secure in the locking tabs and the sensor "eyes" must be shown through the openings of the dome
assembly prior to installing the assembly into the substrate.
2. Install the dome lamp trim cover.
3. Install the dome lamp lens (1).
