CTS V6-2.8L (2006)
Power Mirror Motor: Service and Repair
OUTSIDE REAR VIEW MIRROR MOTOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the mirror face.
2. Remove the screws (2).
3. Disconnect the electrical connector.
INSTALLATION PROCEDURE
1. Connect the electrical connector.
2. Align the motor to the mirror assembly.
3. Install the screws (2).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws (2) to 1 N.m(9 lb in).
4. Install the mirror face.
