CTS V6-2.8L (2006)
Installation Procedure
1. Install the left rear park brake cable (2) to the left rear park brake cable bracket (1).
2. Ensure that the locking tabs are properly seated.
3. Connect the left rear park brake cable (2) to the left rear park brake actuator lever (3).
4. Install the left rear park brake cable (2) to the left rear support mounting bracket (1).
5. Ensure that the locking tabs are properly seated.
6. Connect the left rear park brake cable (2) to the equalizer (1).
7. Connect the intermediate park brake cable (2) to the park brake cable connector (1).
8. Install the left rear tire and wheel assembly.
9. Lower the vehicle.
10. To ensure that the park brake cable retainers are seated, cycle the park brake pedal 1 to 2 times.
Right Rear
Park Brake Cable Replacement - Right Rear
^
Tools Required
-
J 37043 Park Brake Cable Release Tool
Caution: Refer to Brake Dust Caution in Service Precautions.
Removal Procedure
1. Raise the vehicle and suitably support.