CTS V6-2.8L (2006)
Intake Manifold: Service and Repair
Upper Intake Manifold Cover Replacement - Rear
Upper Intake Manifold Cover Replacement - Rear
Removal Procedure
1. Remove the cross car brace, if necessary.
2. Remove the oil fill cap.
3. Disengage the cover/shield from the ball studs by pulling up firmly on the rear and front of the engine cover.
4. Remove the engine cover/sight shield.
5. Remove the hood seal.
6. Remove the air inlet screen panel bolts (1).
7. Remove the passenger side air inlet screen panel (3).
8. Remove the drivers side air inlet screen.
9. Remove the wiper motor module assembly.