CTS V6-2.8L (2006)
Fluid - M/T: Service and Repair
Aisin AY6 - Manual Transmission
Transmission Fluid Replacement
Draining Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Clean away any dirt and debris from around the transmission fluid drain plug area.
3. Position an appropriate container below the transmission drain plug.
4. Remove the transmission fluid drain plug (34) and washer (33). Discard the washer.
5. Allow the transmission fluid to drain into the container.
6. Notice: Refer to Fastener Notice in Service Precautions.
Install the transmission fluid drain plug (34) and a NEW washer (33).
Tighten the drain plug to 37 Nm (27 ft. lbs.).
7. Remove the container used to catch the used transmission fluid from under the vehicle.
Filling Procedure
1. Clean away any dirt and debris from the transmission fluid fill plug area.
2. Remove the transmission fluid fill plug (79) and washer (33). Discard the washer.
