CTS V6-2.8L (2006)
Seat Belt Buckle: Service and Repair
SEAT BELT BUCKLE REPLACEMENT - REAR
REMOVAL PROCEDURE
1. Remove the rear seat cushion.
CAUTION: Refer to SIR Caution in Service Precautions.
2. Remove the seat belt buckle fasteners (1) and remove the seat belt buckles (2).
3. Disconnect the wiring connection to the left and right seat belt buckles.
4. Remove the rear seat belt buckles (2) from the floor pan.
INSTALLATION PROCEDURE
1. Install the rear seat belt buckles (2) to the floor pan.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the seat belt buckle fasteners to 30 N.m (22 lb ft).
2. Connect the left and right rear seat belt buckle electrical connectors.
3. Install the rear seat cushion.
