CTS V6-2.8L (2006)
9. Install the brake pipe bracket (2) to the mounting studs (1).
10. Install the brake pipe bracket retaining nuts.
Tighten the nuts to 10 Nm (89 inch lbs.).
11. Install the tire and wheel.
12. Lower the vehicle.
Coil Spring Insulators Replacement
Coil Spring Insulators Replacement
Removal Procedure
1. Raise and support the vehicle.
2. Remove the rear coil spring.
3. Remove the upper coil spring insulator.
4. Remove the lower coil spring insulator.
Installation Procedure
1. Install the upper coil spring insulator.
2. Install the lower coil spring insulator.
3. Install the rear coil spring.
4. Lower the vehicle.
5. Adjust the rear camber.