CTS V6-2.8L (2006)
Shifter A/T: All Technical Service Bulletins
A/T - Shift Knob Loose/Rattles
Bulletin No.: 06-07-60-014
Date: July 13, 2006
TECHNICAL
Subject:
Rattle Noise from Shift Knob Area/Loose Shift Knob (Remove Shift Knob, Apply Sealant and Retighten Retaining Screw)
Models:
2006 Cadillac CTS
with Automatic Transmission (RPO M82)
Built Prior to May 1, 2006
Condition
Some customers may comment about a rattle noise coming from the shifter area. The customer may also notice that the shift knob is loose.
Cause
The shift knob has a retaining screw at the base facing rearward. This screw can loosen with use and create a rattle condition. Re-tightening the screw or
replacing the knob or shifter will not permanently resolve the condition.
Correction
1.
Remove the shift knob retaining screw.
2.
Apply 242 Blue Threadlocker (medium grade) P/N 12345382 (in Canada, P/N 10953489) to the retaining screw.
3.
Install the shift knob retaining screw.
Tighten
Tighten the screw to 2.5 N.m (22 lb in).
Warranty Information
