CTS V6-2.8L (2006)
Headlamp Washer Hose: Service and Repair
HOSE REPLACEMENT - HEADLAMP WASHER
REMOVAL PROCEDURE
1. Remove the front air deflector.
2. Drain the washer solvent into a suitable container.
3. Disconnect the headlamp washer hose (1) quick connect (3) from the washer pump nozzle located on the inboard side of the washer solvent
reservoir.
4. Disconnect the 2 retainers securing the front air baffles to the front impact bar.
5. Disconnect the headlamp washer hose quick connects from the headlamp washer nozzles located on the bottom side of the headlamps.
6. Disconnect the 2 washer hose clips (2,3) from the main body electrical harness.
7. Remove the washer hose assembly (4) from the vehicle.
INSTALLATION PROCEDURE
1. Position the washer hose assembly (4) to the main body electrical harness.
2. Secure the washer hose clips (2,3) to the electrical main body harness.
3. Secure the headlamp washer hose quick connects to both headlamp washer nozzles.
4. Reposition and secure the front air baffles to the front impact bar.
5. Secure the washer hose quick connect (3) to the headlamp washer pump nozzle.
6. Install the front air deflector.
7. Fill the reservoir with washer solvent.
