CTS V6-3.2L VIN N (2003)
Speaker: Service and Repair
Speaker Replacement - Rear
SPEAKER REPLACEMENT - REAR
REMOVAL PROCEDURE
1. Remove the rear shelf trim panel.
2. Disconnect the speaker electrical connector.
3. Remove the nuts securing the speaker the rear electrical carrier (1).
4. Remove the rear speaker.
INSTALLATION PROCEDURE
1. Install the rear speaker to the rear electrical carrier.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Reinstall the nuts securing the speaker to the electrical carrier (1).
Tighten
Tighten the fasteners to 9 N.m (80 lb in).
3. Connect the electrical connector.
4. Install the rear shelf trim panel.