CTS V6-3.2L VIN N (2003)
Front Bumper Cover / Fascia: Service and Repair
Close Out Panel - Front Bumper Fascia Lower
Close Out Panel - Front Bumper Fascia Lower
Removal Procedure
1. Remove the front fascia. Refer toFascia Replacement - Front Bumper (See: Fascia Replacement - Front Bumper) .
2. Remove the screw (1) retaining the closeout panel (2) to the fascia.
3. Remove the closeout panel (2) from the fascia.
Installation Procedure
1. Position the closeout panel (2) to the fascia.
Notice: Refer toFastener Notice in Cautions and Notices.
2. Install the screw (1) to the closeout panel (2).
Tighten the screw (1) to 3 Nm (27 lb in).
3. Install the front fascia. Refer toFascia Replacement - Front Bumper (See: Fascia Replacement - Front Bumper) .