CTS V6-3.2L VIN N (2003)
10. Inspect for correct loading of the tumblers (2) by inserting the key into cylinder (5). The sidebar (4) should be flush with the outside diameter of
the cylinder (5).
11. Lightly lubricate the tumbler (2) surfaces using the provided lubrication.
12. With the key inserted into the housing, install and carefully stake one tumbler retainer (1) into the recessed area (5) on the cylinder.
13. Turn over the cylinder and carefully stake the other tumbler retainer (1) into the recessed area (5) on the cylinder.
ASSEMBLING AND CODING THE IP COMPARTMENT DOOR LOCK CYLINDER
The IP compartment door lock cylinder uses 4 of the ten cut positions 7-10. The retainer tumbler position is adjacent locations with all four tumblers
(3) located on the same side. A stainless steel retaining tumbler is used in the IP compartment door lock cylinder to retain the lock cylinder in the latch
assembly and does not move when the key is inserted. The retainer tumbler occupies the slot closest to the head of the cylinder assembly (1) and
comes pre-installed in the cylinder.
1. Hold the cylinder (3) so that the side with 4 tumbler spring wells is facing up.
2. Insert tumbler springs (2) into the 4 spring wells.
