CTS V6-3.2L VIN N (2003)
5. Carefully reach inside the headliner until the electrical connector (1) is exposed.
NOTE: Use care when removing or installing the headliner. Excessive bending will damage the headliner.
6. Disconnect the electrical connector.
7. Remove the sunshade from the vehicle.
INSTALLATION PROCEDURE
1. Position the sunshade to the headliner.
2. Push the electrical connector and the wiring through the hole in the headliner.
3. Connect the electrical connector (1).
4. Position the plastic retainer (2) over the top of the electrical harness.
5. Align the fasteners to the holes in the sunshade metal integral clip (2).