CTS V6-3.2L VIN N (2003)
5.
With the backing paper side to the factory heat element material, insert the service heat element (3) between the trim cover material and the factory
heat element material (4).
^
Ensure the service heat element is laying flat, is tucked into each corner and extends to each side.
^
Carefully remove the backing paper from the service heat element.
6.
Use 3M(R) Highland Cloth Duct Tape, P/N 06969, or equivalent, to cover the seam opening.
7.
Connect the seat cushion extension heat element 2-way white connector to the seat cushion center heat element harness.
8.
Install the front seat cushion trim cover. Refer to Seat Cushion Cover and Pad Replacement-Front in the Seats sub-section of the Service Manual.
9.
Install the front seat cushion. Refer to Seat Cushion Replacement-Front in the Seats sub-section of the Service Manual.
10.
Verify the seat heat function is operational.
Parts Information
Parts are currently available from GMSPO.
Warranty Information
