CTS V6-3.2L VIN N (2003)
6. Disconnect the afterboil coolant pump electrical connector (2) from the afterboil coolant pump (3).
7. Remove the afterboil coolant pump bolts (1).
8. Remove the afterboil coolant pump.
Installation Procedure
1. Install the afterboil coolant pump.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
2. Install the afterboil coolant pump bolts (1).
Tighten the bolts to 10 Nm (89 inch lbs.).
3. Connect the afterboil coolant pump electrical connector (2) to the afterboil coolant pump (3).
4. Connect the hose to the afterboil coolant pump.