CTS V6-3.2L VIN N (2003)
Thermostat Bypass Hose: Service and Repair
Coolant Bypass Hose Replacement
Coolant Bypass Hose Replacement
Tools Required
-
J 38185 Hose Clamp Pliers
Removal Procedure
1. Partially drain and recover the coolant.
2. Using J 38185 slide the hose clamps (1) back on the bypass hose (2).
3. Remove the bypass hose.
Installation Procedure
1. Install the bypass hose.
2. Using J 38185 install the hose clamps (1) into the original position on the bypass hose (2).
3. Fill the vehicle with coolant.