CTS V6-3.2L VIN N (2003)
Camshaft: Service and Repair
Camshaft - Left
Camshaft Replacement- Left
Tools Required
-
J 35268-A Camshaft/Front Main Seal Installer
Removal Procedure
1. If equipped with RPO code KA3, remove the bolt (1) securing the coolant heater ground lead (2) to the camshaft bearing cap (3).
2. Remove the left camshaft cover.
3. Remove the left camshaft drive sprockets.
4. Alternately loosen the camshaft bearing cap bolts a few turns at a time using the loosening sequence.
5. Remove the camshaft bearing cap bolts.