CTS V6-3.2L VIN N (2003)
Oil Pick Up/Strainer: Service and Repair
Oil Pump Pipe and Screen Assembly Replacement
Removal Procedure
1. Remove the oil pan.
2. Remove the oil pump pipe screen brace bolts (2).
3. Remove the oil pump pipe screen bolts (1).
4. Remove the oil pump pipe screen from the engine.
5. Remove the O-ring seal. Do not reuse the seal.
6. Clean and inspect the oil pump pipe screen.
Installation Procedure
1. Insert a new O-ring seal fully into the seal groove.
2. Position the oil pump pipe screen to the engine.