CTS V6-3.2L VIN N (2003)
4. Lube O-ring with refrigerant oil before installing hose.
5. Connect the discharge hose to condenser.
6. Install the discharge hose bolt (1).
Tighten
Tighten the bolt to 5.4 N.m (48 lb in).
7. Connect the power steering lines to hoses.
8. Lube O-ring with refrigerant oil before installing hose.
9. Connect the condenser inlet hose to the condenser.
10. Connect the condenser hose bolt (1) to the condenser.
Tighten
Tighten the bolt to 5.4 N.m (48 lb in).
11. Ensure that side seals are not damaged and in position around pipes.
12. Install the air deflector.