CTS V6-3.2L VIN N (2003)
1. Install the HVAC control module into the trim plate.
2. Install the HVAC control module screws (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the screws to 2 N.m (18 lb in).
3. Connect the HVAC control module electrical connector.
4. Connect the ash tray electrical connector.
5. Install the HVAC control module trim plate by pressing trim until tabs engage.
6. Install the screw behind the ashtray.
Tighten