CTS V6-3.2L VIN N (2003)
4. Install the discharge hose bolt (2).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolt to 9.8 N.m (87 lb in).
5. Install the discharge hose to the condenser.
6. Install the bolt (1) to the discharge hose.
Tighten
Tighten the bolt to 5.4 N.m (48 lb in).
7. Install the air deflector.
8. Evacuate and recharge the refrigerant system.
9. Leak test the fittings of the component using J 39400-A.