CTS V6-3.2L VIN N (2003)
6. Remove the retaining bolt (1) from the compressor.
7. Remove the suction hose from the vehicle.
INSTALLATION PROCEDURE
1. Coat the new O-rings with refrigerant oil.
2. Install the suction hose.
3. Connect the suction hose to the evaporator.
4. Position the clamp (1) around the suction hose and engage.
IMPORTANT: Squeeze the clamp together until you hear it engage.
5. Gently tug on the suction line to ensure that the clamp is engaged.
6. Position the suction hose into the bracket.
7. Install the screw (1) into the bracket.
