CTS V6-3.2L VIN N (2003)
Air Bag(s) Arming and Disarming: Service and Repair
Zone 6
1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2. Turn the ignition switch to the OFF position.
3. Remove the key from the ignition switch.
4. Remove the rear seat.
5. Locate the right rear fuse center (1) under rear seat, then remove the fuse center top cover.
6. Locate and remove the SIR fuse from the right rear fuse center.
IMPORTANT: With the SIR fuse removed and the ignition switch in the ON position, the AIR BAG warning indicator illuminates. This is normal
operation, and does not indicate an SIR system malfunction.
7. When disabling the roof rail module go to step 8, if the side impact sensor (SIS) needs disabling then go to step 11.
8. Remove the right rear sail panel.
9. Remove the connector position assurance (CPA) (1) from the right/passenger roof rail module connector (2).
10. Disconnect the right roof rail module yellow connector (3) from the vehicle harness yellow connector (2).
