CTS V6-3.2L VIN N (2003)
7. Remove the bolts (2) that secures the front fascia to the fender.
8. Loosen the bolts (1) that attach the front fascia to the fender.
9. Pull the front fascia forward to ailing the fascia studs with enlarged portion of the hole within the key slot in the fender.
10. Gently pull the front fascia downward to disengage it from the front fender.
11. Remove the three bolts that secure the headlamp to the vehicle.
12. Disengage headlamp washer hose if equipment
13. Reach behind the headlamp to disconnect the headlamp electrical connector.
IMPORTANT: It will take a high amount of force to perform the next step. Pull the headlamp straight forward to disengage the headlamp ball stud
from the fender socket.
14. Pull the top part of the front fascia and grille assembly forward only far enough to remove the headlamp assembly from the vehicle.
15. Remove the headlamp assembly from the vehicle.
16. Remove the headlamp bulb cover from the headlamp assembly.
17. Remove the headlamp bulb from the headlamp assembly.
