cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Enabling|Zone 1|Page 2923 > < Disabling|Zone 1|Page 2920
Page 1
background image

Air Bag(s) Arming and Disarming: Service and Repair
Zone 1

1. Remove the key from the ignition switch.

2. Connect the EFS connector to the EFS (2).
3. Connect the CPA to the EFS connector.

4. Install the SIR fuse into the right rear fuse center (1).
5. Install the right rear fuse center cover.
6. Install the rear seat. 
7. Use caution while reaching in and turn the ignition switch to the ON position.

The AIR BAG indicator will flash then turn OFF.

8. Perform the Restraint Systems Diagnostic System Check if the AIR BAG warning indicator does not operate as described. Refer to Diagnostic

System Check - Restraint Systems.

Enabling|Zone 1|Page 2923 > < Disabling|Zone 1|Page 2920