CTS V6-3.2L VIN N (2003)
5. Disconnect the heated oxygen sensor connector (1) from the bracket (3).
6. Remove the bolt (6) securing the surge tank outlet pipe (1) to the vent housing.
7. Position the J 38185 to the clamp (5) in order to remove the surge tank outlet hose from the coolant inlet pipe (4).
8. Remove the surge tank outlet hose/pipe (1) from the engine.
Installation Procedure
1. Position the surge tank outlet hose/pipe (1) to the engine.
2. Position the J 38185 to the clamp (5) in order to connect the surge tank outlet hose to the coolant inlet pipe (4).
Notice:
Refer to Fastener Notice in Service Precautions.
See: Engine, Cooling and Exhaust/Service Precautions/Vehicle Damage Warnings/Fastener Notice
