CTS V6-3.2L VIN N (2003)
3. Install the bolt (2) securing the surge tank outlet pipe (1) to the engine rear lift bracket.
Tighten the surge tank outlet pipe to engine rear lift bracket bolt to 9 Nm (80 inch lbs.).
4. Install the bolt (6) securing the surge tank outlet pipe (1) to the vent housing.
Tighten the surge tank outlet pipe to vent housing bolt to 9 Nm (80 inch lbs.).
5. Connect the heated oxygen sensor connector (1) to the bracket (3).
6. Position the J 38185 to the clamp in order to connect the surge tank outlet hose (2) to the surge tank (1).
7. Install the wiper motor module.
8. Fill the cooling system.