CTS V6-3.2L VIN N (2003)
9.2.
Close the retainers (2) at the top.
9.3.
Insert the retainers (2) into the rail.
10. Install the chassis hose/pipes into the retainers (1) located at the forward portion of the rail.
11. Close the retainers.
12. Push the locking mechanism (1) inward in order to engage the fuel/brake bundle chassis pipe retainers to the rail.
13. Refer to Quick Connect Fitting(s) Service (Plastic Collar) in order to connect the following quick connect fittings to the chassis bundle:
-
The fuel filter
-
The fuel return hose
-
The fuel EVAP hose
14. Lower the vehicle.
15. Insert the chassis hose/pipes into the retainer located at the shock tower.
16. Close the retainer.