CTS V6-3.2L VIN N (2003)
14.
Install the TCC PWM solenoid valve retainer into the control valve body.
15.
Connect the electrical wiring harness connector to the TCC PWM solenoid.
Important:
If the bolts are tightened at random, valve bores may become distorted and inhibit proper valve operation.
16.
Tighten the control valve body assembly bolts in sequence.
Tighten
^
Tighten the 8 inverted TORX(R) valve body bolts to 11 N.m (97 lb in).
^
Tighten the manual shift detent spring bolt to 11 N.m (97 lb in).
Important:
Fluid pan gaskets are reusable. Replace the gasket ONLY if the sealing surface is damaged.
17.
Install the transmission fluid pan and filter. Refer to Automatic Transmission Fluid/Filter Replacement.
Important:
The oil drain plug and oil fill plug must be inspected for damage to the threads or 0-rings before reinstalling. If damage is found, replace with a
new plug.
18.
Install the transmission drain plug.
Tighten
Tighten the fluid drain plug to 20 N.m (15 lb ft).
19.
Fill the transmission.
20.
Road test the vehicle.
Parts Information
Parts are currently available from GMSPO.
Warranty Information
