CTS V6-3.2L VIN N (2003)
7. Connect the left/driver roof rail module yellow connector (1) to the vehicle harness yellow connector (2).
8. Install the CPA (3) to the left roof rail module yellow connector (2).
9. Install the left rear sail panel.
10. Connect the passenger/I/P module yellow connector (1) to the vehicle harness yellow connector (2).
11. Install the CPA to the I/P module yellow connector (1).
12. Install the passenger/right sound insulator to the instrument Panel (I/P) (3).
13. Connect the passenger/RF side impact module and seat belt pretensioner yellow connector to the vehicle harness yellow connector (1) located
under the front of passenger seat.
14. Install both CPA locks to the RF side impact module and pretensioner yellow connector (1).
