CTS V6-3.2L VIN N (2003)
Power Seat Switch: Procedures
SEAT SWITCH REPLACEMENT - POWER
REMOVAL PROCEDURE
1. Disable the SIR system.
CAUTION: Refer to SIR Caution in Service Precautions.
2. Remove the seat cushion from the adjuster track enough to gain access to the power seat switch.
3. Remove the knobs from the switch by gently prying them off using a flat bladed tool.
4. On the underside of the seat cushion, locate the retainers (1) securing the power seat switch bezel to the seat cushion frame (3).
5. Squeeze the retainers while gently prying the bezel from the seat cushion frame.
6. Remove the power seat switch bezel.
7. Release the J channel retainers securing the seat cushion cover to the seat cushion frame in order to gain access to the power seat switch.