CTS V6-3.2L VIN N (2003)
6. Remove the power steering reservoir mounting bolts (1 and 3).
7. Remove the power steering reservoir (2).
Installation Procedure
1. Install the power steering reservoir.
Notice: Refer to Fastener Notice in Service Precaution.
2. Install the power steering reservoir mounting bolts (1 and 3).
^
Tighten the bolts (1) to 9 Nm (80 inch lbs.).
^
Tighten the bolt (3) to 25 Nm (18 ft. lbs.).
3. Connect the wiring harness (2) to the power steering reservoir (1).
