CTS V6-3.2L VIN N (2003)
seated.
6. Connect the power steering pressure hose to the power steering pump.
7. Install the power steering pressure hose retaining nut to the air conditioning compressor.
^
Tighten the hose to air compressor retaining nut to 8 Nm (71 inch lbs.).
^
Tighten the hose to the gear retaining bolts to 9 Nm (80 inch lbs.).
^
Tighten the hose to gear fittings to 30 Nm (22 ft. lbs.).
8. Install the clip to the power steering pressure hose.
9. Install the intake air resonator.
10. Install the air cleaner assembly.
11. Remove the drain pan from under the vehicle.
12. Bleed the power steering system.
13. Install the front air deflector.
(RHD)
Power Steering Pressure Hose Replacement (RHD)
Removal Procedure
1. Place a drain pan under the vehicle.
2. Remove the air cleaner assembly.
3. Raise and support the vehicle. Refer to Vehicle Lifting.
4. Remove the front air deflector.
