cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Disabling|Zone 1|Page 8009 > < Disabling|Zone 1|Page 8007
Page 1
background image

Air Bag(s) Arming and Disarming: Service and Repair
Zone 3

1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2. Turn the ignition switch to the OFF position.
3. Remove the key from the ignition switch.

4. Remove the rear seat. 
5. Locate the right rear fuse center (1) under rear seat, then remove the fuse center top cover.
6. Locate and remove the SIR fuse from the right rear fuse center.

IMPORTANT:With the SIR fuse removed and the ignition switch in the ON position, the AIR BAG warning indicator illuminates. This is normal
operation, and does not indicate an SIR system malfunction.

7. Remove the left/driver sound insulator from the instrument panel (I/P) (2). 
8. Remove the connector position assurance (CPA) from the steering wheel module coil yellow connector (1).
9. Disconnect the steering wheel module coil yellow connector (1) from the vehicle harness yellow connector (3).

Disabling|Zone 1|Page 8009 > < Disabling|Zone 1|Page 8007