CTS V6-3.2L VIN N (2003)
Air Bag(s) Arming and Disarming: Service and Repair
Zone 8
1. Remove the key from the ignition switch.
2. Connect the steering wheel module coil yellow connector (1) to the vehicle harness yellow connector (3).
3. Install the CPA to the steering wheel module coil yellow connector (1).
4. Install the driver/left sound insulator to the instrument Panel (I/P) (2).
5. Connect the driver/LF side impact module and seat belt pretensioner yellow connector to the vehicle harness yellow connector (1) located under
the front of driver seat.
6. Install both CPA locks to the LF side impact module and pretensioner yellow connector (1).