CTS V6-3.2L VIN N (2003)
5. Using J24319-B disconnect the outer tie rod from the steering knuckle.
Important: Note the number of turns during removal for installation.
6. Remove the outer tie rod from the inner tie rod.
Installation Procedure
Important: Use the same number of turns that was used during removal.
1. Install the outer tie rod to the inner tie rod. Do not tighten the jam nut at this time.
2. Connect the outer tie rod to the steering knuckle.
Notice: Refer to Fastener Notice in Service Precaution.
3. Install the outer tie rod retaining nut.
