CTS V6-3.2L VIN N (2003)
20. Using mechanics wire (4) support the power steering gear (3) to the bolt bracket installed in the oil pan.
21. Remove the outer tie rod retaining nut.
22. UsingJ 24319-B , separate the outer tie rod from the steering knuckle.
23. Remove the lower shock bolts (1).
Important: The brake calipers do not need to be removed from the knuckle assembly.
24. Disconnect the lower ball joint from the steering knuckle and position the knuckle assembly away from the lower control arms. Refer toLower
Control Arm Replacement in Front Suspension
